As I earlier discussed how can you connect Xbox 360 controller to PC, some readers have asked me about what can be done if the Xbox 360 controller driver is not working on their Windows PC at all. Well, let me tell you that the reasons usually revolve around a corrupted or outdated driver or Windows 10 is not upgraded to the latest version. Don’t worry; you can play your favorite Xbox games once again on Windows PC with some of the quickest fixes mentioned below.

• Microsoft is not releasing the drivers because they are pre built into the system. The problem is once the system identifies the device, regardless if the drivers are found, it finishes the installation. You however get an incomplete installation.
• If an exclamation point appears next to the name of the device that is not functioning, Device Manager cannot find the device driver. Go to step 3, 'Use Windows Update to find a device driver.' If no exclamation point appears next to the name of the device that is not functioning correctly, go to step 2, 'Uninstall and reinstall the device.
• After you install Network Controller, you must use Windows PowerShell commands for additional Network Controller configuration. For more information, see Deploy Network Controller using Windows PowerShell. To install Network Controller. In Server Manager, click Manage, and then click Add Roles and Features. The Add Roles and Features wizard opens.
• Open “Device Manager.” Press Windows Key and X (Windows+X) at the same time. Click the ‘Device.

Fix: Xbox 360 Controller Not Working On Windows 10

The first three fixes are meant to update Xbox 360 driver on Windows PC only. You can go for any of them amongest the manual, via device manager or a third-party tool. However, a third-party tool makes it easier for you to update any driver in the future, name one. So I recommend Smart Drive Care which you will be able to learn about below.

Fix 1: Update Xbox 360 Driver Manually

Cannot find type Microsoft.Windows.Networkcontroller.credentialproperties: verify that the assembly containing this type is loaded Archived Forums Windows Server Technical Preview.

When you have Xbox 360 controller not working problem on Windows 10, go to the official website for the same. For more, follow the steps below.

Step 1: Go to Microsoft Xbox official website.

Step 2: Navigate yourself to the section of Downloads. Choose Windows 10 (or other operating systems) and select the driver.

Step 3: Install the driver on Windows PC. Once installed, check if the issue has been resolved.

Fix 2: Update Xbox 360 Driver Using Device Manager

Although we are once again updating the Xbox 360 controller driver, it is being done using Device Manager. For this method, follow the instructions.

Step 1: Open Device Manager by pressing Windows key + X at the same time.

Step 2: Here, expand Xbox 360 peripherals, right-click on the Xbox 360 controller driver and select Update Driver. (The name could be Xbox 360 Receiver for Windows)

NOTE that if you cannot find the exact controller driver, go to Device Manager > View tab > Show hidden devices > Universal Serial Bus Controllers or Universal Serial Bus Devices >

Fix 3: Update Xbox 360 Driver Using Smart Driver Care (Recommended)

If you could see that the above method is a little tricky process and requires a lot of patience and hard work, I would have chosen Smart Driver Care. This is why I recommend the same to you. Let me tell you how it makes things easier for you.

Microsoft Controller Driver

Step 1: Download Smart DriverCare on your PC. from the button below:

Step 2: Let the tool scan the whole system and indicate all the outdated drivers to you.

Step 3: Once detected, click on ‘Update All’ or the Xbox 360 Controller driver. It will be automatically updated in a few minutes without worrying about anything else.

Moreover, Smart Driver Care is also capable of backing up installed drivers, restoring them in one click and updating all the outdated drivers in one go. Ease of use and user-friendly interface are some other features that I liked.

Fix 4: Check For Windows Update

Did you check your Windows with the latest updates? If you are facing Xbox 360 controller not working problems on Windows 10, you do not miss the step.

Step 1: Go to Start > Settings > Update & Security.

Step 2: Click on Check for Updates under Windows Update.

If you have updated the system, the problem of Xbox controllers is probably solved.

Conclusion

We are sure that the Xbox 360 controller driver is now working for you by now. If it hasn’t, don’t forget to ping us in the comments section below. Also, read the following:

Frequently Answered Questions

Q1. Why is my Xbox 360 controller not working?

Unless your Xbox 360 controller is not damaged, the reason for it not working may revolve around corrupted or outdated drivers and Windows not updated to the latest version.

Q2. How do I get my Xbox 360 controller to work?

Microsoft Controller Custom

If you keep your Windows updated to the latest version and update the Xbox 360 controller driver, your Xbox controller will probably start to work.

[attention-msg]

How to Fix The driver detected a controller error in Windows 10

One of the worst problems users can encounter on their computers is Blue Screen of Death errors as some of them are quite hard to fix. One of them is the “The driver detected a controller error” Blue Screen error. It could be followed by “DeviceIdeIdeport0 OR”, “on deviceharddisk0dr0”, or “DR3” or the name of the drive or port that’s causing the problem. If you are one of the users who encountered this error, then the suggestions provided in this post would definitely help you in fixing the problem.

Option 1 – Try to disconnect and reconnect all hardware and cables

A lot of users reported that they were able to fix the problem by disconnecting and reconnecting cables and hardware like scanners, printers, cameras can help in fixing the problem. In addition, you can also boot your computer in a Clean Boot State so that you can find the problematic hardware by hit and trial method. Refer to the steps below to do so:

• Log onto your PC as administrator.
• Type in msconfig in the Start Search to open the System Configuration utility.
• From there, go to the General tab and click “Selective startup”.
• Clear the “Load Startup items” check box and make sure that the “Load System Services” and “Use Original boot configuration” options are checked.
• Next, click the Services tab and select “Hide All Microsoft Services” check box.
• Click Disable all.
• Click on Apply/OK and restart your PC. (This will put your PC into a Clean Boot State. And to configure Windows to use the usual startup, just simply undo the changes.)

Updating the outdated device drivers in your computer can also help in fixing the problem. To do so, refer to these steps:

• First, boot your computer into Safe Mode.
• After that, tap the Win + R keys to launch Run.
• Type in devmgmt.msc into the box and tap Enter or click OK to open the Device Manager.

• After that, a list of device drivers will be displayed. From there, look for the any outdated device drivers and click on each one of them.
• After that, right click on each entry of the device drivers and select the “Uninstall Device” option from the menu.
• Now restart your computer.
• After restarting your computer, go to the Settings app and Check for Updates in the Windows Update section.

Updating the BIOS can help you fix the ATTEMPTED_WRITE_TO_READONLY_MEMORY BSOD error but as you know, BIOS is a sensitive part of a computer. Even though it is a software component, the functioning of the hardware depends on it largely. Thus, you must be careful when modifying something in the BIOS. So if you don’t know much about it, it’s best if you skip on this option and try the other ones instead. However, if you are well-versed in navigating the BIOS, then follow the steps below.

• Tap the Win + R keys to open the Run dialog box.
• Next, type “msinfo32” in the field and press Enter to open System Information.
• From there, you should find a search field on the bottom where you have to search for the BIOS version and then press Enter.
• After that, you should see the developer and version of the BIOS installed in your PC.
• Go to your manufacturer’s website and then download the latest version of BIOS in your computer.
• If you are using a laptop, make sure that you keep it plugged in until you have updated the BIOS.
• Now double click on the downloaded file and install the new BIOS version in your computer.
• Now restart your computer to apply the changes made.

Option 4 – Try running the Blue Screen Troubleshooter

You might also want to run the Blue Screen troubleshooter. It is one of the built-in tools in Windows 10 that helps users in fixing system issues including Blue Screen errors. It can be found in the Settings Troubleshooters page. To use it, refer to these steps:

• Tap the Win + I keys to open the Settings panel.
• Then go to Update & Security > Troubleshoot.

• From there, look for the option called “Blue Screen” on your right-hand side and then click the “Run the troubleshooter” button to run the Blue Screen Troubleshooter and then follow the next on-screen options. Note that you might have to boot your PC into Safe Mode.

The Memory Diagnostic tool in windows can help resolve the “The driver detected a controller error” Blue Screen error by checking and automatically fixing any memory-based issues. To run it, refer to these steps:

• Tap the Win + R keys to open Run and type mdsched.exe and hit Enter to open the Windows Memory Diagnostic Tool.
• After that, it will give two options such as:
  • Restart now and check for problems (Recommended)
  • Check for problems the next time I start my computer
• Once your computer has restarted, perform a basic scan or you could also go for the “Advanced” options such as “Test mix” or “Pass count”. Simply tap the F10 key to start the test.

Note: After you select your preferred option, your computer will restart and check for memory-based issues. If it finds any issues, it will automatically fix them and if there’s no issue found, then it’s most likely not a memory-based issue so you should try the other options given below.

If your computer is still under warranty, you should consider replacing your computer’s motherboard in case the options given above failed to work in fixing the Blue Screen error.

If the fixes given above didn’t help you in fixing the “The driver detected a controller error” Blue Screen error, worry not, as there is still another option that could help you. This option is Restoro, also known as a “one-click” solution. What makes Restoro better than other system utility tools or antivirus programs is that aside from helping you free up disk usage and memory in your computer, it helps you in fixing whatever issue your system is facing including BSOD errors. Aside from that, it also cleans out your computer for any junk or corrupted files that help you eliminate any unwanted files from your system. This is basically a solution that’s within your grasp with just a click. It’s easy to use as it is user-friendly. For complete set of instructions in downloading and using it, click on this link.

Safely repairs any PC

Remove malware threats

Detect dangerous websites

Restore max performance

Free precious disk space

Replace damaged windows files

Restoro
(Recommended)

Rating:

Total Downloads: 712,612

Download Size: 0.6mb

Microsoft Xbox One Controller Driver

Download Time: (dsl/cable: 3sec; dialup: 2min)

How to easily boost your PC Performance

Download Restoro and install

Click the “Scan” button

Once the scan completes, click “Fix All” to repair errors

Program scans for issues for free. Fixing requires registration starting as low as $29.95